| By :
Wendy Moyer
An outdoor metal fire pit can be a fantastic addition to anyone's backyard. When the weather begins to get cold fire pits can be terrific places to enjoy quiet conversations. And a fire pit can be just the place you look forward to getting away to after a hard day at work. Fire pits are especially beneficial if you live in a colder climate. Then they will help to extend your outdoor season. They add warmth on a chilly day and heat on a winter's night. And although it takes a bit of work, metal fire pits are quite easy to build and to maintain. And just knowing that your family and your friends will be able to relax in front of your fire pits glow once you have finished building it can be a terrific motivator for you to start the project. Here is what you need to do to build your outdoor metal fire pit. First and foremost you will need to pick a safe location for your pit. You will want to make sure that there isn't any dry vegetation nearby. And must make sure that you build the fire pit a significant distance from any overhanging branches. The bottom line is that you don't want to cause a fire because some floating embers or sparks fly away from your pit. Next you should pick an appropriate metal ring size. Many metal shops have a pretty wide variety of fire pit rings to choose from. The most common sizes are 48 inches, 36 inches, and 29 inches. After you have bought your fire pit ring you will need to dig a hole that is the same diameter as your ring. Dig the hole to a depth of six inches below ground level. You will need to use a level in order to make sure that the bottom of your pit hole is flat and level. Otherwise your ring won't properly sit in the hole. Then, to ensure that there is proper drainage, fill the hole with six inches of gravel. Once that is done you can put the metal ring in the hole. Finally, you should build a sloping wall of soil around the edge of your ring. This will prevent your fire pit from moving while you are using it. Once it's built you should only use wood when you build your fires. And you should always have water available in case any emergencies arise. After you use your pit and you're ready to go back inside your house you'll want to thoroughly soak the pit with water. Also, turn any wood that is still in the pit over to ensure that the fire will not restart when you are not around. Although homemade fire pits are a wonderful addition to any backyard, many people prefer the safety and convenience of using a low cost, professionally manufactured fire pit.
|
![[Valid RSS feed]](http://www.articlesbacklink.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
