Several considerations have to be made in order to properly maintain a pool, and many of them are quite a bit different than those that go along with maintaining pools Brisbane. If you own a spa, it is imperative to familiarise yourself with the many things that go into keeping it clean and safe to use. Below, we highlight a few of the most important things to bear in mind when owning a spa.
Basic Maintenance -
Firstly, you need to make sure that you take care of the basics. The fits is changing the water. This is something that you will need to do on a routine basis; how frequently you do so depends on how much of the water you switch out. If you'd prefer to completely drain your spa and refill it with fresh water - which is much easier to do with spas than with swimming pools Brisbane - then you can do so every three to four months. On the other hand, if you'd prefer to switch out approximately 30% of the water at a time, you should do so every three to four weeks.
Sanitising The Spa -
One of the most important parts of maintaining a spa is sanitising it. You have two basic options at your disposal: chlorine or bromine. A few different things will determine how much sanitiser you'll need to use; these include water temperature, the number of people who regularly use it and the frequency with which it gets used. Check with your local spa store for specific suggestions.
Total Alkalinity -
The total alkalinity of your spa affects its pH, which, in turn, affects how many sanitising chemicals you need to use. Optimally, the total alkalinity of your spa should be between 90 and 150 ppm, or parts per million. If it falls below that range, you can raise it up by using sodium bicarbonate; if it exceeds that range, you can lower it by using hydrochloric acid. To measure those levels, you can pick up a handy test kit at your local pool and spa store.
pH -
The final piece of the spa maintenance puzzle is pH. pH is the measure of alkaline and acid levels in your spa's water. For best results, the pH of your spa should be between 7.0 and 7.8. When your pH is out of whack, various unpleasant things can occur; these include scale formation, cloudy water, irritated eyes and skin, the corrosion of metal and poor chlorine efficiency. For these reasons, it is essential to keep the pH of your spa within the appropriate range. If it's too high, it can be reduced with acid; if it's too low, it can be raised with soda ash.
Author Resource:-
John Clark Pools understand that one of the most popular accessories for swimming pools Brisbane are spas. Many people in Australia end up having spas installed after having pools Brisbane installed; they really do provide a whole new level of comfort, relaxation and enjoyment. Sometimes, people prefer a spa over a pool.
![[Valid RSS feed]](http://www.articlesbacklink.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
