Here are the steps you need to look at for you to get a thought with asbestos removal procedures.
1. Preparation
Part of the preparation for the removal of asbestos containing materials is by complying with the Asbestos Removal Code. You need to determine the boundaries needed in the removal process. You need to keep the place secure by putting up signs and barriers in the area so that no one can enter the premise. After which, electrical, lighting installations and furniture must be removed. The ventilation and air conditioning must be sealed off to prevent asbestos from entering the ventilation ducts. In case you need to have lighting in the area, you should use portable work lights which are wired and grounded to an outside circuit for safety measures. Personal Protective Equipment (PPE) should as well be accessible. Total protective wear, head covers, masking,over boots, gloves and respiratory protective gear such as a gas mask with dual cartridges and HEPA filters are needed. To prevent asbestos from being airborne, tools needed for the removal may include a 2-3 gallon tank sprayer, liquid detergent, putty knives, step ladders, plastic sheeting, asbestos waste disposal bags, duct tape, sealant. To contain the work area, plastic sheeting must be used on the walls and floors and seal everything off with a duct tape.
2. Asbestos Removal Procedure
After preparing the work site and the materials needed, you need to carefully wet the asbestos containing material with "amended" water, which is water mixed with liquid detergent. Don't ever blow up the contaminated area with water. This is crucial to maintain the fibers undamaged so to forbid them from being breathed in. Once it is soaked, you can start scraping off the asbestos containing material carefully. Never break them into pieces for they may still contain fibers which you could ingest. You need to carefully scrape all of the material and leave it intact. The material should still be soaked in water when this process is done. Otherwise, it is time for you to stop working and call in an expert to finish the job. You need to scrape off the walls or flooring first before sealing the area with paint.
3. Disposal of Asbestos Containing Materials
After scraping off the material, you need to place it in special disposal bags including your disposable coveralls. These should be double bagged and double wrapped. Specific bin is compulsory in putting away asbestos because it is unlawful to place asbestos waste and combine it with domestic garbage bins. Each bag must have proper labeling and mention the contents of the waste material. Asbestos waste must be disposed in designated landfills assigned by your local council so it is important to set an appointment with them on when you can have your asbestos containing material disposed. If you need to hire a company to dispose of your asbestos waste, never forget to keep a copy of the receipts as the council may seek these documents to ensure the proper disposal of the asbestos waste.
![[Valid RSS feed]](http://www.articlesbacklink.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
