| By :
Stewart Wrighter
Many people these days tend to do their own maintenance work, or companies have their own teams which go round and keep the factory or building in order. However, if they have to do any kind of high work, they will certainly need an industrial ladder to get up to do their work. An aluminum ladder is now more common on sites but the older wooden ones do show up from time to time. Many companies are now trying to eliminate the usage of such equipment for several reasons. The older A-frame models make it much more difficult for the employee to work from. Not only could he step back inadvertently, making way for quite a serious injury, he will also be unable to be hands free in whatever he is doing. Also, this kind of equipment cannot be put directly in front of the work to be done so the employee will have to lean across somehow. This, naturally, is quite a dangerous position anyway, but it also puts some undue strain on the back too. Since the general design of this very simple piece of equipment has not really changed over the past couple of thousand years, maybe it is time to go a little high-tech and allow workers to stand on a stable platform to do any kind of work that is necessary. These flat decks are modeled after the letter X in that the supporting structure underneath is in this shape. The whole thing is made in sturdy aluminum and gives a wide deck for the employee to work from. Because he is not leaning out in any direction, he can use both hands on the job and he should not feel any strain in his muscles at all. It also allows for the deck to be set at different heights depending on what work is to be done and this makes it a very flexible piece of equipment indeed. These can then be folded down when not in use and transported to just about anywhere where there is more work going on. Of course, people can have them at home too if they so wish and different models come with different weight capacities for just such a reason. They also range from just one and a half feet tall to just about seven feet so this should be more than adequate for the work needed around the home too. Some people like to have a handrail attached too, for that extra bit of safety, and these are usually made to order. This is particularly useful if the platform is placed on uneven ground and it can stand a ten degree tilt and still stay safe. Although some people may feel a slight flex on the platform when they walk on it, the construction is such that it is not about to bend or buckle as long as people do not misuse the equipment. For example, jumping up and down on the platform is not really advised and who would attempt this on a ladder anyway?
|
![[Valid RSS feed]](http://www.articlesbacklink.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
