If you own a Brother printer or copy machine there are many good reasons why you should also use original Brother toner cartridges in your printer. By the same token, there are many reasons why you should avoid using compatible Brother toners, refurbished Brother toner or try to refill your own cartridge. If cost is an issue, you may find it better serves you and your home or business to work out ways to conserve on the amount of printing you do, rather than trying to save money by using compatible toner in your cartridges. The problem with many refurbished cartridges is that while the toner inside the cartridge itself is changed, usually the individual parts such as rollers and small gears are not changed and they are often quite worn to the point that they no longer perform well at all.
At worst, using worn cartridge parts inside your printer could do some damage. At best, it can cause a lot of delay and frustration when you install your refurbished cartridge and it does not work, and thus has to be replaced. This is never a problem when you purchase original Brother toners. Another consideration is that not all toner is the same composition. Brother toner is made specifically to use with the specified models of Brother printers and has the right combination of toner and developer to help it to run smoothly and produce optimum print copies - which is especially important if you are using these prints and toners for something like a corporation or business.
Using an original cartridge will also help to protect the Brother drum inside your printer. Incidentally, to help offset costs, Brother printers have Brother drums, which means you can extend the life of your printer for quite some time. As with the cartridges though, if you do need to replace your drum it is important to use an original drum, not a refurbished or compatible model. One of the best ways to conserve on the amount of money spent on toner cartridges is to do the bulk of your printing on draft mode, which can usually be accessed through the printer properties.
This is usually sufficient for most documents and pages printed. In fact, you can make printing in draft mode your default and that will help you to avoid 'accidentally' printing out a long document in a higher quality. Also, proofread and correct any documents before you go ahead and print. Most word processing programs have spelling and grammar checking options, so be sure to use them as a lot of paper and toner can be wasted by printing unedited work and then having to reprint again. If you need to print out something for informational purposes, try to only print the section that contains the instructions or information you need, rather than printing an entire document.
Above all, in order to lengthen the life of your Brother printer, use original Brother toner cartridges and an original Brother drum. This is probably one of the best ways to ensure that your printer will not only last you a long time, but also give optimum printing results.
![[Valid RSS feed]](http://www.articlesbacklink.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
